Siemens SITRANS FST030 - Page 224

Channel 3 frequency output settings
Table A-56 Channel 3 frequency output settings
Modbus
register
Data type /
Size in bytes
Parameter Description Default value
[units]
(units register)
Value range /
Setting options
Access
level
9299 Unsigned / 2 Redundancy
mode
Redundancy mode. 0
● 0: Off. Channel 3 runs
independently.
● 1: 90°. Channel 3
follows frequency on
channel 2 with a 90°
shift.
● 2: 180°. Channel 3
follows frequency on
channel 2 with a 180°
shift.
Read /
write
Modbus communication
A.9 Modbus holding registers tables
SITRANS FST030 (Modbus)
224 Operating Instructions, 08/2018, A5E37367739-AD