Siemens SITRANS FST030 - Date and Time

A.9.4.5 Date and time
General settings
Table A-71 General settings
Modbus
register
Data type /
Size in bytes
Parameter Description Default value
[unit]
(unit register)
Value range /
Setting options
Access
level
6185 Unsigned / 2 Year Holds current year after
Get time command
was carried out.
Holds year before Set
time command is car‐
ried out.
2016 2001 - 2099 Read /
write
6186 Unsigned / 2 Month Holds current month af‐
ter Get time command
was carried out.
Holds month before
Set time command is
carried out.
1 1 - 12 Read /
write
6187 Unsigned / 2 Day Holds current day after
Get time command
was carried out.
Holds day before Set
time command is car‐
ried out.
1 1 - 31 Read /
write
6188 Unsigned / 2 Hours Holds current hours af‐
ter Get time command
was carried out.
Holds hours before Set
time command is car‐
ried out.
0 0 - 23 Read /
write
6189 Unsigned / 2 Minutes Holds current minutes
after Get time com‐
mand was carried out.
Holds minutes before
Set time command is
carried out.
0 0 - 59 Read /
write
6669 Unsigned / 2 Seconds Holds current seconds
after Get time com‐
mand was carried out.
Holds seconds before
Set time command is
carried out.
0 0 - 59 Read /
write
6184 Unsigned / 2 Get time Command to get the
device's current time by
using the separate pa‐
rameters above.
-
● 0: Cancel
● 1: Get time
Write on‐
ly
Modbus communication
A.9 Modbus holding registers tables
SITRANS FST030 (Modbus)
Operating Instructions, 08/2018, A5E37367739-AD 267