Siemens SITRANS FST030 - Connecting Channels 5 and 6

Configura‐
tion
Software configuration Channel
2 3 4
Relay output
Normally
open
Alarm class
Alarm item
NAMUR status signals
X X
8
H[W
+
-
ChXC
ChX+
ChX-
Normally open
Relay output
Normally
closed
Alarm class
Alarm item
NAMUR status signals
X X
8
H[W
+
-
ChXC
ChX+
ChX-
Normally closed
5.5.4 Connecting channels 5 and 6
Connecting RTD (Resistance Temperature Detector) cable
Perform the following steps for each RTD cable.
1. Loosen the four lid screws and open lid.
2. Remove cap and ferrule from cable gland and slide onto cable.
3. Remove one of the blind plugs (④ or ⑤) and fit cable gland.


F0073.01
4. Push cable through gland opening.
Connecting
5.5 Transmitter power supply, communications and I/Os connection
SITRANS FST030 (Modbus)
46 Operating Instructions, 08/2018, A5E37367739-AD