Note
Operation does not require opening of the device. This means that the high degree of protection
of IP67 and safety in hazardous areas are guaranteed at all times.
6.5 Initial startup
The first time the device is powered up, you will be prompted to set the language. The device
always starts up showing "Language" in English. When the language has been set, you will be
prompted to set the date and time.
Before using the flow meter for the first time, essential parameters should be considered. After
confirming/changing date and time you can choose to accept the default values or start the
Quick commissioning wizard.
You will be asked if you want to start the "Quick commissioning" wizard. If you choose "Yes"
(recommended), the "Quick commissioning" wizard will start. If you choose "No", you accept
the default values of the device, and the next HMI view will be the operation view 1.
Start
Language
Quick commissioning
Set date and time
No
Yes
Continue with Quick commissioning wizard
First startup wizard is now finished
Welcome
Text Options/description
Language Set the language: English, Deutsch
Welcome Information about the "Quick commissioning" wizard
Set date and time The set date and time (real time clock) is used for all time stamps of logged
information.
Quick commissioning The "Quick commissioning" wizard comprises the most important param‐
eters/menus for quick configuration of the flowmeter.
Commissioning
6.5 Initial startup
SITRANS FST030 (Modbus)
Operating Instructions, 08/2018, A5E37367739-AD 53
To Next Page
Loading...
