Pipe expansion Define the pipe expansion coefficients for pressure and temperature in‐
duced pipe expansion
Liner Select "Yes" to configure the liner material.
Select "No" to only configure the Inner pipe roughness.
Liner material Select the liner material.
Liner settings Set the liner sound velocity and thickness.
Disturbed flow Define the type of pipe configuration and the distance to the sensor.
Inner pipe roughness Set the inner pipe roughness.
* Select "Custom" to enter non-standard values.
Figure 6-2
1)
Only for Expert
Medium settings
Yes
Sensor type
FSS200 high precision
FSS200 / 1011 universal
FSS200 / 991 high temperature
1011 high precision liquid
Sensor size
Sensor selection
Sensor settings
Sensor setting (3)
No
Sensor size
Text Options/Description
Sensor settings Select "Yes" to configure the sensors.
Sensor settings Select the sensor type installed (found on sensor label).
Sensor size Select the sensor size from the options list (found on sensor label).
Sensor selection Define the temperature compensation mode, the temperature class, the
spacing offset and the cable length
Commissioning
6.6 Commissioning via local display
SITRANS FST030 (Modbus)
58 Operating Instructions, 08/2018, A5E37367739-AD
To Next Page
Loading...
