Start
Prioritize
1st process value
2st process value
3st process value
4st process value
5st process value
6st process value
Next
Quick start
Quick commissioning
Sensor settings
Process values
Inputs and outputs
Copy configuration
Totalizers
Totalizer 1
Totalizer 2
Totalizer 3
Next
Totalizer 1
Process value
Mass flow
Volume flow
Standard volume flow*
Yes
No
Process value
Units
Direction
Fail-safe behavior
Next
Fail-safe behavior
Run
Hold
Memory
1st value
Volume flow
Mass flow
Standard volume flow*
Flow velocity
Sound velocity
Liquid identifier
Liquident*
Density
Kinematic viscosity
Totalizer 1
Totalizer 2
Totalizer 3
Pressure
Medium temperature
Standard density*
Standard kinematic viscosity*
API gravity*
Standard API gravity*
Specific gravity*
Standard specific gravity
Rate of change
Units
process value
specific list
Finished
Units
Process value
specific list
Direction
Forward and backward
Forward
Backward
Hold
Activate totalizer view
Units
process value
specific list
Low flow cut-off
6.6.1.4 Inputs and outputs wizard
The first screen in the Inputs and outputs wizard informs about the active/passive operation
availability. It shows the application possibilities of your hardware. The kind of operation
depends on the wiring.
Commissioning
6.6 Commissioning via local display
SITRANS FST030 (Modbus)
62 Operating Instructions, 08/2018, A5E37367739-AD
To Next Page
Loading...
