Siemens SITRANS FST030 - Page 66

Alarm class
Alarm item
Status output
Alarm item
Sensor alarms (1)
Sensor alarms (2)
Process alarms (1)
Process alarms (2)
Process alarms (3)
Process alarms (4)
Totalizers alarms
Channel 1 alarms
Input/output alarms
Simulation alarms
Next
Polarity
On delay
Off delay
Next
Status icons
Standard
NAMUR
Signal output
Finished
CH3 alarm class
Maintenance alarm
Function check
Process value alarm
Process value warning
Maintenance demanded
Maintenance required
CH3 NAMUR status signals
Failure
Function check
Out of specification
Maintenance required
CH3 pulse polarity
Active high level
Active low level
Relay output - channels 3 and 4
Relay output - channels 3 and 4
You can configure the functionality of the Relay output, the polarity, on delay and off delay.
Alarm class
Alarm item
Relay output
Alarm item
Sensor alarms (1)
Sensor alarms (2)
Process alarms (1)
Process alarms (2)
Process alarms (3)
Process alarms (4)
Totalizers alarms
Channel 1 alarms
Input/output alarms
Simulation alarms
Next
Polarity
On delay
Off delay
Next
Status icons
Standard
NAMUR
Signal output
Finished
CH3 alarm class
Maintenance alarm
Function check
Process value alarm
Process value warning
Maintenance demanded
Maintenance required
CH3 NAMUR status signals
Failure
Function check
Out of specification
Maintenance required
CH3 pulse polarity
Active high level
Active low level
Commissioning
6.6 Commissioning via local display
SITRANS FST030 (Modbus)
66 Operating Instructions, 08/2018, A5E37367739-AD