Siemens SITRANS FST030 - Reading the Diagnostic Values; Reading; Changing Parameters; Alphanumeric Parameters

7.2.5 Reading the diagnostic values
One of the main views can be configured to show six diagnostic values.
7.3 Reading / changing parameters
Depending on your access level, you can read the current value or edit the value of the selected
parameter.
7.3.1 Alphanumeric parameters
Read only
The view shows the set value. Press
to exit the view.
Edit
Editable alphanumeric parameters are displayed as shown here.
Operating
7.3 Reading / changing parameters
SITRANS FST030 (Modbus)
Operating Instructions, 08/2018, A5E37367739-AD 79