Service and maintenance
8
8.1 Basic safety notes
WARNING
Impermissible repair of the device
● Repair must be carried out by Siemens authorized personnel only.
8.1.1 Impermissible repair of explosion protected devices
WARNING
Impermissible repair of explosion protected devices
Risk of explosion in hazardous areas. May cause death or serious injury.
● Repair must be carried out by Siemens authorized personnel only.
8.2 Recalibration
Siemens Flow Instruments offers to recalibrate the system. The following calibrations are
offered as standard:
● Accredited matched pair calibration
8.3 Cleaning
Cleaning the enclosure
● Clean the outside of the enclosure with the inscriptions and the display window using a cloth
moistened with water or a mild detergent.
● Do not use any aggressive cleansing agents or solvents, e.g. acetone. Plastic parts or the
painted surface could be damaged. The inscriptions could become unreadable.
SITRANS FST030 (Modbus)
Operating Instructions, 08/2018, A5E37367739-AD 83
To Next Page
Loading...
