3. Retain damaged parts for clarification.
4. Check the scope of delivery by comparing your order to the shipping documents for
correctness and completeness.
WARNING
Using a damaged or incomplete device
Risk of explosion in hazardous areas.
● Do not use damaged or incomplete devices.
1.4 Device identification
The FUS380 or FUE380 flowmeter is delivered with different labels (nameplates) on the
transmitter and sensor. The transmitter and sensor are matched paired.
The transmitter has two nameplates. One (silver) is placed on the front of the transmitter. The
transmitter system nameplate (white) is placed on the right side of the transmitter. Both provide
valuable information about the device and system. The sensor has one nameplate. The sensor
system nameplate (white) is placed on the middle of the sensor.
Note
Identification
Identify your device by comparing your ordering data with the information on the product and
specification nameplates.
Introduction
1.4 Device identification
SITRANS FUS380/FUE380
Operating Instructions, 05/2018, A5E00730100-AE 9
To Next Page
Loading...
