Siemens SITRANS FX330 - Page 87

OPERATION 6
87
SITRANS FX330
www.siemens.com/flow08/2022 - A5E36751269-AG EN
C5.3.2 Measurement 1. Line Select: Volume Flow / Norm. Volume Flow / Mass Flow / Volume / Norm. Volume /
Mass / Temperature1 / Temperature2 / Pressure / Density / Vortex Frequency /
Velocity / Specific Enthalpy / Specific Heat Capacity / Reynolds Number
The following options are only available for meter types "Heat" / "Heat & Dens. by
Pr
es." / "Heat & Dens. & FAD":
Gross Power / Net Power / Gross Energy / Net Energy / FAD (only available with the
meter type "Heat & Dens. & FAD")
C5.3.3 0% Range The set value represents the 0% point of the bargraph indication.
Usually 0% flow = 4 mA, but it is also possible to define a higher flow value for 4 mA.
This menu is only avaible, if an option containing a bargraph was selected in C5.3.1.
C5.3.4 100% Range The set value represents the 100% point of the bargraph indication.
Usually 100% flow = 20 mA, but it is also possible to define a lower flow value for 20 mA.
This menu is only avaible, if an option containing a bargraph was selected in C5.3.1.
C5.3.5 Format 1. Line Automatic or 1...8
digits
C5.3.6 Measurement 2. Line Same as C5.3.2, visible if more than one value was selected in C5.3.1.
C5.3.7 Format 2. Line Same as C5.3.5, visible if more than one value was selected in C5.3.1.
C5.3.8 Measurement 3. Line Same as C5.3.2, visible if three values were selected in C5.3.1.
C5.3.9 Format 3. Line Same as C5.3.5, visible if three values were selected in C5.3.1.
C5.4 2. Meas. Page Configurable for 4...20 mA/HART version; same options as in C5.3.
Table 6-33: Menu description C5
Function Setting / Description
C6 Device
C6.1 Information
C6.1.1 Tag Entry and display of measuring point identifier (8 digits).
C6.1.2 Long Tag Entry and display of long measuring point identifier (1...32 digits).
Entry will be displayed in the header bar on the LC display (depending on letter size,
min. 11 digits can be displayed).
C6.1.3 Meter Type Display of meter type as activated in A10 or C6.3.2...C6.3.4 (read-only).
C6.1.4 Serial Number Individual device ID (read-only).
C6.1.5 Manufacturer ID
HART
®
Manufacturer ID = 00042 (0x2A) [SIEMENS] (read-only)
C6.1.6 Device Name SITRANS FX330 (read-only)
C6.1.7 V Number Internal order number (read-only).
C6.1.8 Electronic Revision Electronic revision of this device as listed on device nameplate (for details refer to
Software history on page 6).
C6.1.9 Device Revision (read-only)
C6.1.10 Software Revision (read-only)
C6.1.11 Hardware Revision (read-only)
C6.1.12 Electronic Serial No. Individual ID of electronics component (read-only).
C6.1.13 CG Number Article code for signal converter hardware (read-only).
C6.1.14 Production Date (read-only)
C6.1.15 Calibration Date (read-only)
C6.2 Security
Function Setting / Description
C5 Display