7ML19985JF02 SITRANS LR250(PROFIBUS PA) – INSTRUCTION MANUAL Page 99
mmmmm
A: Parameter List
Appendix A: Alphabetical Parameter
List
Note: Maintenance Parameters are not listed below. See
Remaining Device Lifetime
(3.4.) on page 78
,
Remaining Sensor Lifetime (3.5.) on page 81
,
Service Interval (4.17.) on
page 91
, and
Calibration Interval (4.18.) on page 94
for those parameters.
Parameter Name (Parameter Number) Page Number
Algorithm (2.2.3.1.1.) 60
Auto False Echo Suppression (2.2.4.2.) 64
Auto Suppression Range (2.2.4.3.) 66
CLEF Range (2.2.3.4.1.) 62
Device Address (5.1.) 97
Device Reset (4.1.) 89
Dimension A (2.2.2.4.) 58
Dimension L (2.2.2.5.) 58
Echo Confidence (2.2.3.6.1.) 64
Echo Lock (2.2.3.2.1.) 61
Echo Profile (3.2.) 76
Echo Strength (2.2.3.6.2.) 64
Echo Threshold (2.2.3.1.2.) 60
Empty rate (2.2.6.3.) 68
Fail-safe Mode FB1 (2.4.2.) 73
Fail-safe Value FB1 (2.4.3.) 74
Fail-safe Mode FB2 (2.4.4.) 74
Fail-safe Value FB2 (2.4.5.) 74
Far Range (2.2.3.5.2.) 63
Fill Rate (2.2.6.2.) 68
Filter Time Constant (2.3.1.4.) 70
Firmware Revision (2.1.4.) 53
Hardware Revision (2.1.6.) 53
High Calibration Pt. (2.2.1.5.) 55
Language (7.) 98
LCD Contrast (4.3.) 90
LCD Fast Mode (4.2.) 90
Level Offset (2.2.1.9.) 55
Loader Revision (2.1.5.) 53
LOE Timer (2.4.1.) 73
Low Calibration Pt. (2.2.1.4.) 54
Material (2.2.1.2.) 54
Maximum Internal Temperature (3.3.8.) 77
To Next Page
Loading...
