7ML19985JF02 SITRANS LR250 (PROFIBUS PA) – INSTRUCTION MANUAL Page 27
mmmmm
Quick Start: local
Programming via the handheld programmer
Parameter menus
Parameters are identified by name and organized into function groups, then arranged in a
5-level menu structure (see
LCD menu structure
on page 159).
1. Enter PROGRAM mode
• Point the programmer at the display (from a
maximum distance of 300 mm [1 ft]).
• RIGHT Arrow activates PROGRAM
mode and opens menu level 1.
• Mode opens the menu level last
displayed in PROGRAM mode within the last
10 minutes, or menu level 1 if power has been
cycled since then.
Note: For the complete list of parameters with instructions, see
Parameter Reference
on page 51
1. QUICK START
2. SETUP
2.1. DEVICE
2.2. INPUT
2.2.1. SENSOR CALIB.
2.2.1.1.PROPAG. FACTOR
display
handheld programmer
Max. 300 mm
(1 ft)
To Next Page
Loading...
