7ML19985JF02 SITRANS LR250 (PROFIBUS PA) – INSTRUCTION MANUAL Page 43
mmmmm
SIMATIC PDM
Changing parameter settings using SIMATIC PDM
1) Launch SIMATIC PDM, connect to SITRANS LR250, and upload data from the
device.
2) Adjust parameter values in the parameter value field then press Enter. The status
fields read Changed.
3) Open the Device menu, click on Download to Device, then use File – Save, to save
parameter settings. The status fields are cleared.
Parameters accessed via pull-down menus
You have access to a number of functions via pull-down menus from the menu bar. under
Device or View.
For a complete list see
Pull-down menus via SIMATIC PDM
on page 51.
Notes:
• For a complete list of parameters, see
Parameter Reference
on page 51.
• Clicking on Cancel during an upload from device to SIMATIC PDM will result in some
parameters being updated.
value
fields
pull-
down
menus
To Next Page
Loading...
