Page 50 SITRANS LR250 (PROFIBUS PA) – INSTRUCTION MANUAL 7ML19985JF02
mmmmm
SIMATIC PDM
Device Status
Open the menu View – Device Status to view Device Status, Extended Diagnostics,
Maintenance, and Diagnostics status.
•See Diagnostics (3.) on page 75.
•See Maintenance Status (3.4.7.) on page 80 and Maintenance Status (3.5.7.) on page
84.
Acknowledge Faults
• Open the menu View – Acknowledge Faults, select the appropriate item from the
Extended Diagnostics pull-down menu, and click on Transfer.
Wear
Reports the number of hours the device has been operating, and the number of times it
has been powered up.
Open the menu View – Wear to view:
• Powered Hours
• Power-on Resets
Peak Values
Open the menu View – Peak Values to view:
• Sensor minimum and maximum Measured Values
• Minimum and maximum Output Values for AIFB1 and AIFB2
• Minimum and maximum Internal Temperatures
To Next Page
Loading...
