7ML19985JF02 SITRANS LR250 (PROFIBUS PA) – INSTRUCTION MANUAL Page 51
mmmmm
Parameters
Parameter Reference
Parameters are identified by name and organized into function groups. Menus arranged
on up to five levels give access to associated features and options. (See
LCD menu
structure
on page 159 for a chart.)
Parameters accessible via the handheld programmer are preceded by a number.
Parameters not preceded by a number are accessible only via SIMATIC PDM.
Some parameters are accessible in SIMATIC PDM via pull-down menus. Where those
parameters can also be accessed via the handheld programmer, they are found in the
numbered list, and directions for SIMATIC PDM are given below the individual parameter.
Page references for further information on using these features via SIMATIC PDM can be
found in the table below.
Pull-down menus via SIMATIC PDM
NOTE: Table continues on next page.
Notes:
• Default settings in the parameter tables are indicated with an asterisk (*) unless
explicitly stated.
• See
Programming via the handheld programmer
on page 27
for detailed instructions.
• Do not use the handheld programmer at the same time as SIMATIC PDM, or erratic
operation may result.
• Mode toggles between PROGRAM and Measurement Modes.
• For Quick Access to parameters via the handheld programmer, press Home , then
enter the menu number, for example:
2.2.1.
Device menus page View menus page
Communication path Simulation 46
Download to device
Upload to PC/PG
Update Diagnostic Status
Device Status 50
Trend 49
Show Echo Profile
a)
Device Status 50
Acknowledge Faults 50
Wear 50
Peak Values 50
Set Address 35
Quick Start 36
Auto False Echo Suppression 44
TVT Shaper 45
• In Navigation mode, ARROW keys navigate the menu in the direction of
the arrow.
• Press RIGHT Arrow to open Edit Mode, or to save a modification.
To Next Page
Loading...
