Page EN-16 SITRANS LR250 (HART) – QUICK START MANUAL 7ML19985QX81
mmmmm
English
Quick Start Wizard via the handheld programmer
1. Quick Start
a) Point the programmer at the display (from a maximum distance of 600 mm [2 ft.]),
then press Right ARROW to activate PROGRAM mode and open menu level 1.
b) Press Right ARROW twice to navigate to menu item 1.1 and open parameter
view.
c) Press Right ARROW to open Edit mode or Down ARROW to accept default
values and move directly to the next item.
d) To change a setting, scroll to the desired item or key in a new value.
e) After modifying a value, press Right ARROW to accept it and press Down
ARROW to move to the next item.
f) Quick Start settings take effect only after you select Yes to Apply changes in step
1.7.
2.1. Material
2.2. Response Rate
Sets the reaction speed of the device to measurement changes in the target range.
Clear
Numeric
editing
• Erases the display.
Decimal
point
Numeric
editing
• Enters a decimal point.
Plus or
minus sign
Numeric
editing
• Changes the sign of the entered value.
to
Numeral
Numeric
editing
• Enters the corresponding character.
Notes:
• The Quick Start Wizard is a complete package and the settings are inter-related.
• Each time the Quick Start Wizard is initiated, the start-up settings are factory defaults.
The Wizard will not recall previous user-defined settings.
Options
LIQUID
LIQUID LOW DK (low dielectric liquid)
Options
SLOW 0.1 m/minute
MED 1.0 m/minute
FAST 10.0 m/minute
Key Name Function (continued)
To Next Page
Loading...
