Siemens Sitrans LR250 - Quick Start Wizard Via the Handheld Programmer

Commissioning
6.2 Programming SITRANS LR250
SITRANS LR250 with FOUNDATION FIELDBUS
Compact Operating Instructions, 09/2021, A5E48453221-AB
49
6.2.5 Quick Start Wizard via the handheld programmer
Parameter menus
Note
For the complete list of parameters with instructions, and Dimension drawings, see the full
operating instructions.
1. Quick Start
1.1. Quick Start Wiz
• Point the programmer at the display from a maximum distance of 300 mm (1 ft), then
press RIGHT arrow
to activate PROGRAM mode and open menu level 1.
• Press RIGHT arrow
twice to navigate to menu item 1.1 and open parameter view.
• Press RIGHT arrow
to open Edit mode or DOWN arrow to accept default values
and move directly to the next item.
• To change a setting, scroll to the desired item or key in a new value.
• After modifying a value, press RIGHT arrow
to accept it and press DOWN arrow
to move to the next item.
• Quick Start settings take effect only after you select Finish.
Material
Selects the appropriate echo processing algorithms for the material [see Position Detect
(2.5.7.2.) for more detail].
Options
*
LIQUID
LIQUID LOW DK
a)
(low dielectric liquid – CLEF algorithm enabled)
a)
dK < 3.0