Siemens SITRANS LR500 Series - Introduction to SITRANS LR500; Purpose of Documentation; Document History; Firmware Revision History

Introduction
2
2.1 Purpose of this documentation
These
instructions contain all information required to commission and use the device. Read the
instructions carefully prior to installation and commissioning. In order to use the device
correctly, 󹪝rst review its principle of operation.
The instructions are aimed at persons mechanically installing, connecting and
commissioning the device, as well as service and maintenance engineers.
2.2 Document history
The following table shows major changes in the documentation compared to the previous
edition.
Edition Remark
03/2024 First edition
2.3 FW revision history
Sensor
Firmware revision PDM EDD revision Date Changes
1.00.00 1.00.00 March 2024
• Initial release
HMI
Firmware revision Date Changes
1.00.00 March 2024
• Initial release
2.4 Product compatibility
The f
ollowing table describes compatibility between manual edition, device revision,
engineering system and associated Electronic Device Description (EDD).
Manual
edition
Remarks Device revision Compatible version of device integration package
03/2024

First edition HART
FW
: 1.00.00 or later
HW: 1.00.00 or later
Device revision 1 or later
SIMATIC PDM V9.2 EDD: 1.00.00 or later
SITRANS LR500 series with mA/HART
Operating Instructions, 03/2024, A5E51099898-AA 13