Siemens SITRANS LR500 Series - Local Display Version Information; Diagnostics Parameters; Echo Profile Diagnostics; Device Status 1 Information

FW version (3.1.5.6)
Displays version number corresponding to software or 󹪝rmware embedded in device.
Final assembly number (3.1.5.7)
Sets a number for user to identify the device. It is normally changed when electronics or other
device components are upgraded in the 󹪝eld.
9.3.1.6 Local display (3.1.6)
HW version (3.1.6.1)
Displays version number corresponding to local display of device.
FW version (3.1.6.2)
Displays version number corresponding to software or 󹪝rmware embedded in local display.
9.3.2 Diagnostics (3.2)
9.3.2.1 Echo pro󹪝le (3.2.1)
Initiates and displays an echo pro󹪝le.
9.3.2.2 Device status 1 (3.2.2)
Displays the status of the device.
Setting [ ] Simulation mode
[ ] Non-v
olatile memory check failure
[ ] Volatile memory check failure
[ ] Internal power supply is out of allowable range
[ ] Process conditions out of speci󹪝cation
[ ] Electronics defect
[ ] Diagnotics simulated
[ ] Sensor break
[ ] Out of service
[ ] Invalid device con󹪝guration
[ ] Sensor fail-safe timer expired
Default [ ] indicates active device status
[ ] indicat
es inactive device status
Parameter assignment
9.3Maintenance and diagnostics (3)
SITRANS LR500 series with mA/HART
130 Operating Instructions, 03/2024, A5E51099898-AA