Siemens SITRANS LT500 - Introduction; Purpose of this Documentation; Designated Use; Industrial Use Note

SITRANS LT500 with ultrasonic transducer inputs
Compact Operating Instructions, 02/2024, A5E52021877-AA
7
Introduction
2
2.1 Purpose of this documentation
These instructions are a brief summary of important features, functions and safety
information, and contain all information required for safe use of the device. Read the
instructions carefully prior to installation and commissioning. In order to use the device
correctly, first review its principle of operation.
The instructions are aimed at persons who install and commission the device.
To realize optimum performance from the device, read the complete operating instructions.
2.2 Designated use
Use the device in accordance with the information on the nameplate and in the Technical
specifications (Page 102).
2.3 Industrial use note
NOTICE
Use in a domestic environment
This Class A Group 1 equipment is intended for use in industrial areas.
In a domestic environment this device may cause radio interference.
2.4 Product compatibility
The following table describes compatibility between document edition, device revision,
engineering system and associated Electronic Device Description (EDD).
Service channel
Manual
edition
Remarks Device revision Compatible version of device integration package
02/2024
First edition
Service channel
FW: 1.00.00
HW: 1.00.00
Device revision 0
SIMATIC PDM V9.2
EDD: 1.00.04 or later
SITRANS DTM V4.3 EDD: 1.00.04 or later