Page 12 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL A5E33701270
mmmmm
Operation - PDM
Quick Start (Volume)
Use this wizard to configure volume applications employing standard vessel shapes.
Open the menu Device – Wizard - Quick Start (Volume):
Step 1 – Identification
1. You can accept the default values without modification (TAG, Long TAG, Descriptor,
Message, and Installation Date fields can be left blank),
OR
1. Click on Read Data from Device (if this is not the first time running the Quick Start
Wizard).
2. The default Language is English. Select a different language value from the drop-
down box if you wish to change the language displayed on the device.
3. After making all desired changes, click on Next.
Step 2 – Application
1. Select the Transducer that will operate with the LUT400.
The Application Type defaults to Volume.
Note: Italian, Portuguese and Russian are not supported in SIMATIC PDM for
SITRANS LUT400. If the device is set to one of these languages, it may be
necessary to switch the device to English, German, French, Spanish or Chinese.
To Next Page
Loading...
