Siemens SITRANS LUT400 - Master Reset; Pull-Down Menu Access; Scan Device

Page 52 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL A5E33701270
mmmmm
Operation - AMS
Master Reset
• Navigate to Configure/Setup > Operation > Reset
• Click on Master Reset and click Next to perform a reset to Factory Defaults (or click
Cancel to abort).
• Scan device (see below).
Pull-down menu access
A pull-down menu under Actions gives alternative access to several features.
Scan Device
• Open the menu Actions > Scan Device.
Scan Device uploads parameters from the device (synchronizes parameters).
Action menu items