Page 54 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL A5E33701270
mmmmm
Operation - AMS
Quick Start Wizards via AMS Device Manager
A Wizard provides an easy step-by-step Quick Start procedure that configures the device for
a simple application. Four Quick Start Wizards are available via AMS Device Manager:
•
Wizard - Quick Start (Level)
on page 55
•
Wizard - Quick Start (Volume)
on page 57
•
Wizard - Quick Start (Volume - Linearization)
on page 60
•
Wizard - Quick Start (Flow)
on page 63
A Wizard to configure pumps is also available:
•
Wizard - Pump Control
on page 66
Notes:
• The layout of the dialog boxes shown may vary according to the resolution setting
for your computer monitor
• The format of date fields in AMS will reflect the user’s operating system
configuration.
• At each step, you can accept the default values without modification and click on the
next step to proceed.
• After modifying parameters click on Apply inside the Quick Start window to write the
new values to the device.
• Click on OK only if you wish to update all parameters to the device and close AMS.
To Next Page
Loading...
