Siemens SITRANS LUT400 - Auto Zero Head

Page 84 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL A5E33701270
mmmmm
Operation - AMS
OFF Setpoint Pump 1
ON Setpoint Pump 2
OFF Setpoint Pump 2
OPERATION
Operation
Select Analog Ouput (tab)
Long TAG 3.1.2
Current Output Function
Select Analog Output
Auto Zero Head (tab)
Long TAG 3.1.2
Zero Head Offset 2.15.3.5
Head Measurement 2.12.5.5
Set Zero Head Offset
Auto Sensor Offset (tab)
Long TAG 3.1.2
Sensor Offset 2.2.3
Distance Measurement 2.12.5.3
Set Sensor Offset
Auto Sound Velocity (tab)
Long TAG 3.1.2
Sound Velocity at 20 degrees C 2.12.1.5
Distance Measurement 2.12.5.3
Set Sound Velocity
Real Time Clock (tab)
Long TAG 3.1.2
Current Date 2.14.1
Current Time 2.14.2
Set Real TIme Clock
Tests (tab)
Long TAG 3.1.2
Loop-Test 2.5.1
Reset (tab)
Long TAG 3.1.2
Master Reset 3.2.3
Configuration Flag Reset
Reset Min/Max Temperatures
(OCM) Reset Daily Totalizers 2.16.5
(OCM) Reset Running Totalizer 2.16.6
(Pumped Volume) Reset Running Totalizer 2.7.3.5
SETUP
Sensor
Configure/Setup Function Group (cont’d)
parameter
number