Siemens SITRANS LUT400 - Page 93

A5E33701270 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL Page 89
mmmmm
Operation - AMS
Process Values Log Rate 2.10.1.2
(Alarm Log) Enable 2.10.2.1
Flow Log Mode 2.10.3.1
Standard Flow Log Interval 2.10.3.3
Standard Flow Log Setpoint 2.10.3.4
Rapid Flow Log Interval 2.10.3.5
Rapid Flow Log Setpoint 2.10.3.6
Other Control (tab)
Long TAG 3.1.2
(Elapsed Time Relay) Enable 2.11.1.1
Interval 2.11.1.2
Relay Duration 2.11.1.3
Assigned Relay 2.11.1.4
Relay Logic 2.11.1.5
(Time of Day Relay) Enable 2.11.2.1
Activation Time 2.11.2.2
Relay Duration 2.11.2.3
Assigned Relay 2.11.2.4
Relay Logic 2.11.2.5
(External Totalizer) Enable 2.11.3.1
Multiplier 2.11.3.2
Relay Duration 2.11.3.3
Assigned Relay 2.11.3.4
Relay Logic 2.11.3.5
(External Sampler) Enable 2.11.4.1
Multiplier 2.11.4.2
Interval 2.11.4.3
Relay Duration 2.11.4.4
Assigned Relay 2.11.4.5
Relay Logic 2.11.4.6
Signal Processing
Temperature and Velocity
Temperature and Velocity (tab)
Long TAG 3.1.2
Sound Velocity 2.12.1.1
Process Temperature 2.12.1.2
Temperature Source 2.12.1.3
Fixed Temperature 2.12.1.4
Sound Velocity at 20 degrees C 2.12.1.5
Echo Select
Echo Select (tab)
Long TAG 3.1.2
Configure/Setup Function Group (cont’d)
parameter
number