Siemens SITRANS LUT400 - Maximum Volume (2.6.3.); Dimension a (2.6.4.); Dimension L (2.6.5.); User Defined Unit (2.6.6.)

SITRANS LUT400
182 Operating Instructions, 07/2019, A5E33329501-AC
9.2.6.3 Maximum Volume (2.6.3.)
The maximum volume of the vessel. Enter the vessel volume corresponding to High
Calibration Point. For example, if your maximum vessel volume is 8000 L, enter a value of
8000.
Values
Range: 0.0 to 9999999
Default: 100.0
9.2.6.4 Dimension A (2.6.4.)
The height of the vessel bottom when the bottom is conical, pyramidal, parabolic, spherical,
or flat -sloped. If the vessel is horizontal with parabolic ends, the depth of the end. See
Vessel Shape (2.6.1.) (Page 180) for an illustration.
Values
Range:
0.0
to
99.999
Default: 0.000
Defined in Units (2.1.1.) (Page 168).
9.2.6.5 Dimension L (2.6.5.)
Length of the cylindrical section of a horizontal parabolic end vessel. See Vessel Shape
(2.6.1.) (Page 180) for an illustration.
Values
Range: 0.0 to 99.999
Default: 0.000
Defined in Units (2.1.1.) (Page 168).
9.2.6.6 User Defined Unit (2.6.6.)
Set the unit text to display for current volume when Volume Units (2.6.2.) (Page 181) set to
user-defined. Limited to 16 ASCII characters.
Note
The text entered is simply for display purposes. No unit conversion occurs.
9.2.6.7 Table 1-8 (2.6.7.)
If your vessel shape is more complex than any of the preconfigured shapes, you can define
the shape as a series of segments. A value is assigned to each level breakpoint and a
corresponding value is assigned to each volume breakpoint. Level values are defined in
Units (2.1.1.) (Page 168). Volume values are defined in Volume Units (2.6.2.) (Page 181).
Level Values
Range: 0.000 to 60.000
Default: 0.000