Siemens SITRANS LUT400 - Out-Of-Bounds Level Alarm (2.8.5.)

SITRANS LUT400
200 Operating Instructions, 07/2019, A5E33329501-AC
High Level Value (2.8.4.2.)
Sets the upper level value for range within which the In-bounds Level Alarm will activate.
Values
Range: 0.000 to 99999.000
Default: 0.000
Low Level Value (2.8.4.3.)
Sets the lower level value for range within which the In-bounds Level Alarm will activate.
Values
Range: 0.000 to 99999.000
Default: 0.000
Assigned Relay (2.8.4.4.)
Determines which relay (if any) will be activated when the In-bounds Level Alarm activates.
Options
*
NO RELAY
RELAY 1
RELAY 2
RELAY 3
Alarm State (2.8.4.5.)
Read only. Used to view the current state of the In-bounds Level Alarm.
Options
ACTIVE
INACTIVE
9.2.8.5 Out-of-bounds Level Alarm (2.8.5.)
Reported when material level is outside a user-defined range (see High Level Value
(2.8.5.2.) (Page 201) or Low Level Value (2.8.5.3.) (Page 201)).
Enable (2.8.5.1.)
Enables/disables Out-of-bounds Level Alarm.
Options
ENABLED
*
DISABLED