Siemens SITRANS LUT400 - Low Temperature Alarm (2.8.6.)

SITRANS LUT400
Operating Instructions, 07/2019, A5E33329501-AC
201
High Level Value (2.8.5.2.)
Sets the upper level value for range outside of which the Out-of-bounds Level Alarm will
activate.
Values
Range: 0.000 to 99999.000
Default: 0.000
Low Level Value (2.8.5.3.)
Sets the lower level value for range outside of which the Out-of-bounds Level Alarm will
activate.
Values
Range: 0.000 to 99999.000
Default: 0.000
Assigned Relay (2.8.5.4.)
Determines which relay (if any) will be activated when the Out-of-bounds Level Alarm
activates.
Options
*
NO RELAY
RELAY 1
RELAY 2
RELAY 3
Alarm State (2.8.5.5.)
Read only. Used to view the current state of the Out-of-bounds Level Alarm.
Options
ACTIVE
INACTIVE
9.2.8.6 Low Temperature Alarm (2.8.6.)
Reported when process temperature is within a user-defined range (see Low Temperature
Value ON (2.8.6.2.) (Page 202) or Low Temperature Value OFF (2.8.6.3.) (Page 202)).
Enable (2.8.6.1.)
Enables/disables Low Temperature Alarm.
Options
ENABLED
*
DISABLED