Siemens SITRANS LUT400 - Time (2.14.2.); Daylight Saving (2.14.3.)

SITRANS LUT400
228 Operating Instructions, 07/2019, A5E33329501-AC
9.2.14.2 Time (2.14.2.)
Time is the current time in 24-hour format: HH:MM[:SS].
Values
Range: 00:00:00 to 23:59:59
A value for seconds [:SS] is optional. If a value is not entered, the clock will default to 0
seconds.
9.2.14.3 Daylight Saving (2.14.3.)
Use the following parameters to enable and define start/end dates for daylight saving.
(Start/end time of day is always 2:00am.)
Example:
Set the start of daylight saving to the second Sunday in February, and the end of daylight
saving to the first Sunday in November:
Starting Ordinal = Second
Starting Day = Sunday
Starting Month = February
Ending Ordinal = First
Ending Day = Sunday
Ending Month = November
Enable (2.14.3.1.)
Enables/disables daylight saving.
Options
ENABLED
* DISABLED
Starting Ordinal (2.14.3.2.)
The order of the day within the month when daylight saving will begin.
Options
FIRST, SECOND, THIRD, FOURTH
*
FIRST
Starting Day (2.14.3.3.)
The day of the week on which daylight saving will begin.
Options
SUNDAY, MONDAY, TUESDAY, WEDNESDAY, THURSDAY, FRIDAY,
SATURDAY
*
SUNDAY