Siemens SITRANS LUT400 - Totalizers (2.16.)

SITRANS LUT400
Operating Instructions, 07/2019, A5E33329501-AC
237
Flowrate Breakpoints: The flowrate corresponding to each Head Breakpoint entered, defined
in Flowrate Units (2.15.3.7.) (Page 233).
Head Values
Range: 0.000 to 60.000
Default: 0.000
Flowrate Values
Range: 0 to 9999999
Default: 0
See Universal calculation support (Page 147) for details on how to specify universal flows.
Entering breakpoints via SIMATIC PDM:
See Quick Start (Flow) in the LUT400 Communications manual1.
2.15.5.1. Table 1-8
2.15.5.1.1. Head 1
2.15.5.1.2. Flow 1
2.15.5.1. Table 9-16
2.15.5.1.1. Head 9
2.15.5.1.2. Flow 9
2.15.5.1. Table 17-24
2.15.5.1.1. Head 17
2.15.5.1.2. Flow 17
2.15.5.1. Table 25-32
2.15.5.1.1. Head 25
2.15.5.1.2. Flow 25
9.2.16 Totalizers (2.16.)
Available only on LUT430 (Pump and Flow model) and LUT440 (OCM model).
Note
Default settings in the parameter tables are
indicated with an asterisk (*) unless explicitly
stated.