SITRANS LUT400
Operating Instructions, 07/2019, A5E33329501-AC
269
• Write access enabled
• Write access disabled
1)
Lowest priority number equals highest fault severity.
11.3 General Fault Codes
If two faults are present at the same time, the device status indicator and text for the
highest priority fault will display.
Certain faults exist, such as with a loss of echo (LOE) or a broken cable, that when
triggered cause the mA output to go to a fail-safe reading (see
Fail-Safe (2.4.)
(Page 175)) and LUI to display dashes (– – – – – – –) until fault is cleared. These faults
are indicated with an asterisk (*) in the table below.
To Next Page
Loading...
