Siemens SITRANS LUT400 - Page 316

SITRANS LUT400
314 Operating Instructions, 07/2019, A5E33329501-AC
2.10.2.1 ENABLE
2.10.2.2 PROCESS VALUES LOG RATE
2.10.3 ALARM LOG
2.10.3.1 ENABLE
2.10.4 FLOW LOG (LUT430, 440 only)
2.10.4.1 FLOW LOG MODE (LUT430)
2.10.4.2 FLOW LOG MODE (LUT440)
2.10.4.3 STANDARD FLOW LOG INTERVAL
2.10.4.4 STANDARD FLOW LOG SETPOINT
2.10.4.5 RAPID FLOW LOG INTERVAL
2.10.4.6 RAPID FLOW LOG SETPOINT
2.10.5 DELETE LOGS
2.11 OTHER CONTROL
2.11.1 ELAPSED TIME RELAY
2.11.1.1 ENABLE
2.11.1.2 INTERVAL
2.11.1.3 RELAY DURATION
2.11.1.4 ASSIGNED RELAY
2.11.1.5 RELAY LOGIC
2.11.2 TIME OF DAY RELAY
2.11.2.1 ENABLE
2.11.2.2 ACTIVATION TIME
2.11.2.3 RELAY DURATION
2.112.4 ASSIGNED RELAY
2.11.2.5 RELAY LOGIC
2.11.3 EXTERNAL TOTALIZER (LUT430, 440 only)
2.11.3.1 ENABLE
2.11.3.2 MULTIPLIER
2.11.3.3 RELAY DURATION
2.11.3.4 ASSIGNED RELAY
2.11.3.5 RELAY LOGIC
2.11.4 EXTERNAL SAMPLER (LUT430, 440 only)
2.11.4.1 ENABLE
2.11.4.2 MULTIPLIER
2.11.4.3 INTERVAL
2.11.4.4 RELAY DURATION
2.11.4.5 ASSIGNED RELAY
2.11.4.6 RELAY LOGIC
2.12 SIGNAL PROCESSING
2.12.1 TEMPERATURE AND VELOCITY
2.12.1.1 SOUND VELOCITY