Siemens SITRANS LUT400 - Page 44

Connecting
5.1 Connecting SITRANS LUT400
SITRANS LUT400
42 Operating Instructions, 07/2019, A5E33329501-AC
USB connection
①
USB cable
Use 5-pin USB Mini-B cable. The cable should not exceed 3 m (9.8 ft.).
Note
Do not use a USB extension cable with the LUT400. Data Logging may not occur, even after
extension cable has been disconnected. (If a USB extension cable has been used in error, a
power reset of the device is required to restart Data Logging.)