Siemens SITRANS MAG 1100 - Checking the Consignment; Device Identification

1.4 Checking the consignment
1.
Check the packaging and the delivered items for visible damages.
2. Report any claims for damages immediately to the shipping company.
3. Retain damaged parts for clarification.
4. Check the scope of delivery by comparing your order to the shipping documents for
correctness and completeness.
WARNING
Using a damaged or incomplete device
Risk of explosion in hazardous areas.
●
Do not use damaged or incomplete devices.
1.5 Device identification
Inspection
1. Check for mechanical damage due to possible improper handling during shipment. All
claims for damage are to be made promptly to the shipper.
2. Make sure the scope of delivery, and the information on the type plate correspond to the
ordering information
Identification
1
7
8
2
3
4
5
6
9
① Product name Sensor product name
② System order no. Device-specific system order number
③ Material Sensor material
④ Cal. Factor Calibration factor
⑤ Fluid group Fluid group statement required by PED
⑥ Lining Liner type Ceramic
⑦ MAWP Maximum allowable working pressures at -20 °C (-4 °F) and 150
°C (302 °F)
⑧ Tmedia Process media temperature
⑨ Year of Manufacture Manufacturing year
Introduction
1.5 Device identification
6
www.eltra-trade.com
info@eltra-trade.com +421 552 601 099