Siemens SITRANS MAG 1100 - Further Information; Security Information

Figure 1-1 MAG 1100 identification nameplate example
1
2
① Intrinsical safety data
② Ex approvals Ex approval specifications for the sensor
Figure 1-2 MAG 1100 Ex identification nameplate example
1.6 Further Information
Product information on the Internet
The Operating Instructions are available on the documentation disk shipped with the device,
and on the Internet on the Siemens homepage, where further information on the range of
SITRANS F flowmeters may also be found:
Local contact person (http://www.automation.siemens.com/partner)
Worldwide contact person
If you need more information or have particular problems not covered sufficiently by these
Operating
Instructions, get in touch with your contact person. You can find contact information
for your local contact person on the Internet:
Product information on the internet (
http://www.siemens.com/flow)
See also
Technical support
(Page 42)
1.7 Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines, and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens’ products and solutions only form one element of such a concept.
Customer is responsible to prevent unauthorized access to its plants, systems, machines and
networks. Systems, machines and components should only be connected to the enterprise
Introduction
1.7 Security information
7
www.eltra-trade.com
info@eltra-trade.com +421 552 601 099