4.4 Remote installation
For remote versions the SENSORPROM
®
has to be removed from the sensor terminal box
and mounted in the remote transmitter.
Figure 4-3 Remote installation
Cable length and type (as described in Cable requirements (Page 72)) must be used.
For installation conditions for sensors, see respective sensor operating instructions.
1. Remove sensor terminal box lid.
2. Remove SENSORPROM
®
unit from sensor terminal box.
Installing/Mounting
4.4 Remote installation
SITRANS MAG 6000 I/6000 I Ex de
Operating Instructions, 08/2018, A5E02083319-AH
25
To Next Page
Loading...
