Menu item Parameter Factory settings Options More info
Output Current output Off for
MAG5000/
6000
On/off, Unidirectional/bidirectional, 0 to 20 mA/
4 to 20 mA/4 to 20 mA + Alarm
Output settings
(Page 49
)
●
Alarm level
Low High/Low
●
Alarm diff.
No Yes/No
●
Time constant
5 s 0.1 to 30 s
Digital output Pulse Error, direction/limit, batch, frequency, pulse, er‐
ror number, off
Digital output -
pulse (Page 79)
Relay output Error level Error, direction/limit, cleaning, error number, off Error level
(Page
79)
Direction/limit
switch
Off 1 setpoint, 2 setpoints Direction/limit
(Page
80)
●
Setpoints
0% -100 to +100%
●
Hysteresis
5% 0.0 to 100%
Batch Off Batch (Page 81)
●
Batch quantity
0 Sensor size dependent
●
Batch
compensation
0 -100 to +100 m
3
●
Batch counter
Down Up, down
Frequency Off 500 Hz, 1 kHz, 5 kHz, 10 kHz Digital output -
frequency
(Page 79)
●
Time constant
5 s 0.1 to 30 s
Pulse On Digital output -
pulse (Page 79)
●
Pulse polarity
Positive Positive, negative
●
Pulse width
66 ms 64 μs 130 μs, 260 μs, 510 μs, 1.0 ms, 2.0 ms,
4.1 ms, 8.2 ms, 16 ms, 33, ms, 66 ms, 130 ms,
260 ms, 520 ms, 1.0 s, 2.1 s, 4.2 s
●
Volume/pulse
Sensor size de‐
pendent
Dimension-dependent
●
Time constant
0.1 s 0.1 to 30 s
External input External input Off Batch, reset totalizer, freeze output, forced out‐
put, off
External input
(Page 82)
●
Batch
Start Start, hold/continue, stop, Qmax 2
Sensor charac‐
teristics
Correction factor 1 0.85 to 2.00 Sensor charac‐
teristics
(Page 83)
Language Language English English, German, French, Danish, Swedish, Fin‐
nish,
Spanish, Russian, Italian, Portuguese, Pol‐
ish
Changing lan‐
guage (Page 48)
Factory settings
B.1 Transmitter factory settings
90
SITRANS MAG 6000 I/6000 I Ex de
Operating Instructions, 08/2018, A5E02083319-AH
To Next Page
Loading...
