Technical data
SITRANS P220 (7MF1567)
A5E03304437-02, 12/2011
Mode of operation
Measuring range > 2.5 ... < 600 bar
Piezoresistive with stainless steel
diaphragm
Input
Measured variable input
Measuring range for gauge
pressure
Overload limit Burst pressure
0 ... 2.5 bar g
> -0.8 / < 6.25 bar g 25 bar g
0 ... 4 bar g
> -0.8 / < 10 bar g 40 bar g
0 ... 6 bar g
> -1 / < 15 bar g 36 bar g
0 ... 10 bar g
> -1 / < 25 bar g 60 bar g
0 ... 16 bar g
> -1 / < 40 bar g 96 bar g
0 ... 25 bar g
> -1 / < 62.5 bar g 150 bar g
0 ... 40 bar g
> -1 / < 100 bar g 240 bar g
0 ... 60 bar g
> -1 / < 150 bar g 360 bar g
0 ... 100 bar g
> -1 / < 250 bar g 600 bar g
0 ... 160 bar g
> -1 / < 400 bar g 960 bar g
0 ... 250 bar g
> -1 / < 625 bar g 1 500 bar g
0 ... 400 bar g
> -1 / < 1 000 bar g 2 400 bar g
0 ... 600 bar g
> -1 / < 1 500 bar g 3 600 bar g
Measuring range for gauge
pressure (for US market only)
Overload limit Burst pressure
0 ... 30 psi g
> -5.8 / < 80 psi g 420 psi g
0 ... 60 psi g
> -11.5 / < 140 psi g 580 psi g
0 ... 100 psi g
> -14.5 / < 300 psi g 520 psi g
0 ... 150 psi g
> -14.5 / < 350 psi g 870 psi g
0 ... 200 psi g
> -14.5 / < 550 psi g 1 390 psi g
0 ... 300 psi g
> -14.5 / < 800 psi g 2 170 psi g
0 ... 500 psi g
> -14.5 / < 1 400 psi g 3 480 psi g
0 ... 750 psi g
> -14.5 / < 2 000 psi g 5 220 psi g
0 ... 1 000 psi g
> -14.5 / < 2 000 psi g 5 220 psi g
0 ... 1 500 psi g
> -14.5 / < 3 500 psi g 8 700 psi g
0 ... 2 000 psi g
> -14.5 / < 5 500 psi g 13 920 psi g
0 ... 3 000 psi g
> -14.5 / < 8 000 psi g 21 750 psi g
0 ... 5 000 psi g
> -14.5 / < 14 000 psi g 34 800 psi g
0 ... 6 000 psi g
> -14.5 / < 14 000 psi g 34 800 psi g
0 ... 8 700 psi g
> -14.5 / < 21 000 psi g 52 200 psi g
Measuring accuracy
Measurement deviation at 25 ÀC
(77 ÀF),
Characteristic deviation, hysteresis
and repeatability included
typically: 0.25 % of full scale value
maximum: 0.5 % of full scale value
Setting T99 < 0.1 s
Long-term drift
Start-of-scale value and
measuring span
0.25 % of full scale value/year
Ambient temperature influence
Start-of-scale value and
measuring span
0.25 %/10 K of full-scale value
Vibration influence (complying
with IEC 60068-2-6)
0.005 %/g to 500 Hz in all
directions
Auxiliary power influence 0.005 %/V
Conditions during operation
Ambient conditions Outdoor and indoor use
Process temperature -30 ⁄ +120 ÀC (-22 ... +248 ÀF)
Ambient air temperature -25 ⁄ +85 ÀC (-13 ... +185 ÀF)
Altitude max. 2 000 m ASL
Use an appropriate power supply for
altitudes higher than 2000 m ASL.
Relative humidity 0 ... 100 %
Storage temperature -50 ⁄ +100 ÀC (-58 ... +212 ÀF)
Degree of protection (complying
with EN 60529)
IP65 with plug complying with
EN 175301-803-A
IP67 with M12 plug
IP67 with cable
IP67 with fast-fit cable gland
Electromagnetic compatibility complying with EN 61326-1
complying with EN 61326-2-3
complying with NAMUR NE21, only
for ATEX device and max. measured
value deviation of < 1 %
Construction
Weight approx. 0.090 kg (0.198 lb)
Process connections Dimension drawings
Electrical connections
Plug complying with
EN 175301-803-A Form A with cable
inlet M16x1.5 or -14NPT or Pg 11
M12 plug
2- or 3-wire (0.5 mm
2
)
Cable (± 5.4 mm)
Fast-fit cable gland
Material of the parts in contact with measured material
Measuring cell stainless steel , material no. 1.4016
Process connection stainless steel, material no. 1.4404 (SST 316 L)
Material of parts not in contact with the medium
Housing stainless steel, material no. 1.4404 (SST 316 L)
Pin and socket plastic
connector housing CuZn, nickel-plated (plug M12)
Cable PVC spec.
Output
Current signal 4 ... 20 mA
Burden (U
B
- 10 V) / 0.02 A
Auxiliary power U
B
DC 7 ... 33 V (10 to 30 V for
hazardous areas)
Current consumption I
B
< 20 mA
Voltage signal 0 ... 10 VDC
Burden > 10 kΩ
Auxiliary power U
B
12 ... 33 VDC
Current consumption < 7 mA at 10 kΩ
Characteristic Linear rising
SO_BA_1567_A5_EN_V2.indd 2SO_BA_1567_A5_EN_V2.indd 2 19.12.2011 11:06:3819.12.2011 11:06:38
© Siemens AG 2011
To Next Page
Loading...
