Siemens SITRANS P220 - Safety Instructions; Safe Use Prerequisites; Laws and Directives; European Directive Compliance

SITRANS P220 (7MF1567)
A5E03304437-02, 12/2011
Electrical connections
Connecting with current output and plug complying with EN 175301 Connecting with voltage output and plug complying with EN 175301
Connecting with current output and plug M12x1 Connecting with voltage output and plug M12x1
Connecting with current output and cable Connecting with voltage output and cable
Connecting with current output and fast-fit cable gland Connecting with voltage output and fast-fit cable gland
Connecting with current output and plug complying with EN 175301 (Ex)
Connecting with current output and plug M12x1 (Ex)
Connection 1 (+) 2 (-) Connection 1 (+U
B
) 2 (-) 3 (+U
0
)
Connection 1 (+) 3 (-) Connection 1 (+U
B
) 3 (-) 4 (+U
0
)
Connection br (+) gn (-) Connection br (+U
B
) wt (-) gn (+U
0
)
Connection 1 (+) 2 (-) Connection 1 (+U
B
) 3 (-) 2 (+U
0
)
Device design with explosion protection: 4 to 20 mA
The grounding connection is conductively connected to the transmitter housing
Key
l
0
= output current U
B
= auxiliary power R
L
= burden U
0
= output voltage = grounding
Correction of zero point and span
The transmitter is preset to the specific measuring range at the manufacturer's plant.
An additional setting is not possible.
Maintenance
The transmitter is maintenance-free.
Check the start of scale value of the device from time to time.
Connection 1 (+) 2 (-)
Connection 1 (+) 3 (-) 4 ( )
+
-
SO_BA_1567_A5_EN_V2.indd 3SO_BA_1567_A5_EN_V2.indd 3 19.12.2011 11:06:3919.12.2011 11:06:39
© Siemens AG 2011