Page 18 SITRANS Probe LU (HART) – OPERATING INSTRUCTIONS A5E32337695
Operation
Handheld Programmer: function keys in RUN mode
Certain functions can be accessed directly from RUN mode by using specific keys.
PROGRAM Mode
Programming
• Set parameters to suit your specific application.
• Activate PROGRAM mode at any time, to change parameter values and set
operating conditions.
• For local programming, use the Siemens handheld programmer.
• For programming from a distance, use either a PC running SIMATIC PDM, or a HART
handheld communicator.
Display
Key Run Mode
mA output value displayed in auxiliary reading field
Internal enclosure temperature displayed in auxiliary reading field (P343).
Parameter for auxiliary readings
1
1.
Press
plus three-digit parameter number, sets parameter to show in the auxiliary display.
Displays the value representing Echo Confidence (P805).
Toggle between Units and % on reading display
Initiate and complete PROGRAM mode access
Measurement key displays distance in auxiliary reading field.
Note: See
Accessing a parameter,
on page 21, for detailed instructions.
1
2
3
4
1 – Primary Reading (displays parameter value)
2 – Secondary Reading (displays parameter
number)
3 – Programming indicator
4 – Auxiliary Reading (displays parameter names
for parameters P001 to P010, if a language is
selected. It displays the index value for indexed
parameters, such as P054.)
To Next Page
Loading...
