SITRANS Probe LU240 with mA/HART
10 Compact Operating Instructions, 09/2021, A5E42673704-AE
3.1 Preconditions for use
This device left the factory in good working condition. In order to maintain this status and to
ensure safe operation of the device, observe these instructions and all the specifications
relevant to safety.
Observe the information and symbols on the device. Do not remove any information or
symbols from the device. Always keep the information and symbols in a completely legible
state.
WARNING: refer to accompanying documents (manual) for details.
Dispose of in an environmentally safe manner, and according to local
regulations.
Observe the test certification, provisions and laws applicable in your country during
connection, assembly and operation. These include, for example:
• National Electrical Code (NEC - NFPA 70) (USA)
• Canadian Electrical Code (CEC Part I) (Canada)
Further provisions for hazardous area applications are for example:
• IEC 60079-14 (international)
• EN 60079-14 (EU and UK)
• For Korea only:
To Next Page
Loading...
