Commissioning
6.3 PROFIBUS configuration for SITRANS SL
SITRANS SL
Operating Instructions, 12/2010, A5E01132948-04
103
SITRANS SL Configuration
Prerequisite:
● SITRANS SL is selected from the hardware catalog and placed into PROFIBUS DP
master system.
● The appropriate measurement type telegram is selected and placed into SITRANS SL
slots starting from the first empty slot.
Procedure:
Modify the I/O addresses of the modules to your needs.
1. ´Select the measurement type from the selection list "Selection of the Present
Configuration", e. g. O
2
Measurement.
To Next Page
Loading...
