Siemens SlMATlC S5-010W - Technical specification; Installation; Mechanical design; Connecting the power supplies

1. Description
l .4 "hchnica! specification
General
technical specification
-p--p--
Construction
Open frame with
plug-in modules
Memory capacity
1 K, ?K, 4K
Memory type EPROM
Housing with
4 module locations
6 moduie locations
8 niodule locations
Addressing range
t+ex. Dec. No.
Timers
D.1 ... 1F.7
(D.1 .. .31.3) 255
Inputs
0.1 ... IF.? (8.1 .. .31.7) 255
outputs
a1 IF.^ (11.1 .. .31.7) 255
Output flags
a1 . . . 1F.7 (0.1 .. .31.7) 255
Retentive flags
0.7 ... 5.7
(0.1 ... 63.7) 511
Non-retentive flags
4D.l . . .5F.7 (6411.1 . . .95.7) 256
Power
supply connections
Tab connectors for quick-connect
Watchdog contactor monitor
terminals 6.3 mm or 2
X 2.8 mm
Fonnections for 48-way plug connector,
inputs arid outputs rarige 2
Battery backup
for flags
Lithium battery,
approx. 5 year
life
20 us
Installation
in control cabinets (e.g. 19")
or on a vertical mounting surface
Execution time per
statement
Ambient temperature range
0..
. +55"C
Cycle monitoring time 200 ms
24
V DC (20.. .30 V)
max. 800 mA
Storage temperature -40.. . +85"C
Supply voltage
Humidity rating
F to DIN 40040
Altitude rating
S to DIN 40040
Current
cor~sumption
of CPU
Mechanical stressing
Test voltage
VDE 0160
VDE 01
l0
Vibration
10-58 Hz, constant deflection 0.15 mm
Clearances in air and
creepage distances
Shock
30 g,
18 ms semi-sinusoidal
Drop VDE 0160
Degree of protection
Dimensions, weights, heat losses
Module
wxhxd
(mm)
Weight
(kg)
Heat loss
(W)
CPU with 2K EPROM submodule
with PU interface module
Input/tirner module
Digital output module
4 X 2 AI24 X 0.8 A
Digital output module 16
x 2 A
Interface module
PU intetface module 500
Empty housing with 4 module locations
6 module locations
8 module locations
* Simultaneity
factor 50
%