EasyManua.ls Logo

Siemens SMART 7KT0311 - Technical Specifications; Measurement and Supply Specifications; Product Functions and Operation

Siemens SMART 7KT0311
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
SMART 7KT0311 Manual
Technical
specification
7KT0311 (LCD Class 0.5s)
PowerMonitoringDevicepanelinstrumentforstandardelectrical
values;Protocol:ModbusRTU;LCDdisplayVaux:95Vto240VAC
x/1or5A;Class0.5s
Measurements
measuringprocedure
•forvoltagemeasurement True RMS
•forcurrentmeasurement True RMS
typeofmeasuredvaluedetection complete
voltagecurve sinusoidal or distorted
measurablelinefrequency
•initialvalue 45 Hz
•full-scalevalue 65 Hz
operatingmodeformeasuredvaluedetectionautomaticlinefrequency
detection
Yes
Supply voltage
designofthepowersupply SMPSpowersupply
typeofvoltageofthesupplyvoltage AC
Degree of protection class
protectionclassIPonthefront IP65
protectionclassIPoftheterminal IP20
Suitability
suitability for operation Installation in stationary panels in closed rooms
Product Functions
product function
•voltagemeasurement Yes
•currentmeasurement Yes
•activepowermeasurement Yes
•reactivepowermeasurement Yes
•Apparentpowermeasurement Yes
•powerfactormeasurement Yes
•frequencymeasurement Yes
•apparentenergy/activeenergy/reactiveenergy Yes
•%TotalHarmonicsDistortion(THD)measurementforvoltageand
current
Yes
•powerdemandmeasurement Yes
Display and operation
designofthedisplay LCDwithgraphicaldisplayofcurrentloading
heightofthedisplay 60 mm
widthofthedisplay 60 mm
colorofthebackgroundofthedisplay White
time-controlledreductionoftheilluminanceofdisplaybacklightpossible Yes. up to 2 Hrs. (7200 sec)
languageonthedisplayscreenissupported EN
numberofkeys 4
Accuracy
referenceconditionformeteringaccuracy InaccordancewithIEC61557-12,IEC62053-22,IEC62053-23
formulaforrelativetotalmeasurementinaccuracy
•formeasuredvariablevoltage Class0.5asperIEC61557-12
•formeasuredvariablecurrent Class0.5asperIEC61557-12
•formeasuredvariableapparentpower Class1asperIEC61557-12
•formeasuredvariableactivepower Class1asperIEC61557-12
•formeasuredvariablereactivepower Class2asperIEC61557-12
•formeasuredvariablepowerfactor Class1asperIEC61557-12
•formeasuredvariableactiveenergy Class0.5asperIEC61557-12andClass0.5sasperIEC62053-22
•formeasuredvariablereactiveenergy Class2asperIEC61557-12andIEC62053-23

Related product manuals