0.0
syngo CT 2007E Emotion Operator Manual
02/2008
0.0
Switching the System On and Off Operation
D.1-2
Switching on
D. 1
The acquisition system and the console are switched on and off
separately.
D. 1
❏ The acquisition system is switched on using the power
switch at the line connection box (LCB).
❏ The console is started up when you switch on the UPS.
Switching on the system:
D. 1
D. 1
✧ Switch on the power switch at the LCB for gantry and
patient table.
D. 1
✧ Activate the ON pushbutton at the UPS.
After a short time, the entire system is ready for operation.
D. 1
To Next Page
Loading...
