Operation Switching the System On and Off
0.0
syngo CT 2007E Emotion Operator Manual
02/2008
0.0
D.1-17
0.0
Shutdown and restart
D. 1
With the second option in the End Session dialog box, you shut
down the system and restart it.
D. 1
Restarting the system
D. 1
D. 1
✧ Click on Restart System in the End Session dialog box.
D. 1
✧ Confirm with Yes in the dialog box displayed.
The system is restarted. (→ Page D.1-4 Starting procedures)
D. 1
Restart of the application
D. 1
If you want to close all applications and restart the syngo appli-
cation only, use the third option in the End Session dialog box.
D. 1
Closing the applications
D. 1
D. 1
✧ Click on Restart Application in the End Session dialog box.
D. 1
✧ Confirm with Yes in the dialog box displayed.
The applications will be terminated and syngo will be restarted
automatically.
D. 1
To Next Page
Loading...
