0.0
syngo CT 2007E Emotion Operator Manual
02/2008
0.0
Camera Test Quality Assurance
F.6-2
Test film
F.6
After installation, a test film is recorded and evaluated. The
results are summarized in a table. These values are used as ref-
erence values for the daily quality check of the camera.
F.6
B
.6
F
If the equipment or the emulsion number of the film is
changed, the camera must be readjusted by a customer service
technician who is authorized to do so. After this, another cam-
era test is required.
F.6
Camera test report
F.6
You will find a form for the test report in (→ System Owner
Manual)
F.6
To Next Page
Loading...
