137
Spine
ThinSliceSpi
Indications:
Thin slice spiral mode for spine studies when high
resolution for fine structure is required.
ThinSliceSpi 2
nd
reconstr.
kV 120
Effective mAs 330
Slice collimation 0.75 mm
Slice width 3.0 mm 1.0 mm
Feed/Rotation 6.0 mm
Rotation time 0.75 sec.
Kernel B60s B60s
Increment 3.0 mm 0.6 mm
Image order cr-ca
CTDI
w
27.7 mGy
Effective dose Male: 6.6 mSv
Female: 13.2 mSv
MPRthick: ThinSliceSpi sagittal
Image thickness 3
Distance between images 3
Number of images 20
For the 2
nd
reconstruction the Autoload into the MPR
Range on the 3D Card is activated. The images will be
automatically loaded into 3D, MPR, and a coronal
MPRthick Range will pop up.
Please notice, if you are not satisfied with the Range
preset adapt the parameters to your needs and link them
to the series.
To Next Page
Loading...
