Siemens SONOLINE G50 - Page 145

Siemens 7482255 Rev 01 Page 5 of 42
October 2002
Chapter 8 - Software
9. Use the trackball to scroll down the menu (Figure 8-1) to the
System/Language menu item; select the that menu item.
10. Press SET.
11. Select one of the following actions displayed on the screen:
• Retain Current Preset: the system automatically stores the settings for
all existing system presets, QuickSets, OB tables and formulas, and
the current language selection.
• Initialize Preset: all the user-defined settings for the system presets,
QuickSets, and OB tables and formulas are deleted and the language
is set to English.
12. Select the Upgrade System button.
13. Perform the appropriate tasks listed in Table 7, “If – Then Conditional
Table,” on page 8-5.
If the condition in column one is true then perform the action listed in col-
umn two of the same row.
14. The system will display a progress bar at the bottom of the screen, as the
system software installation proceeds; the loading of the software requires
approximately 10 minutes.
15. When the software installation process is completed, the system displays
the active image screen.
16. Press the MO eject button to remove the diskette.
Table 7 If – Then Conditional Table
If... Then...
Retain Current Preset
was selected.
The system instructs the user to restart the system.
Restart the system by pressing the green On/Off switch to de-
energize the system. Wait 15 seconds and then press the
green On/Off switch to energize the system
.
Initialize Preset was
selected.
The system displays a caution message, warning that the
presets will be deleted.
The system requests confirmation to delete the presets and
continue. Select the Yes button to continue; selecting the No
button returns the view to the System/Language screen.
When the Yes button is selected, the system instructs the
user to restart the system.
Restart the system by pressing the green On/Off switch to de-
energize the system. Wait 15 seconds and then press the
green On/Off switch to energize the system
.
Note: If additional disks are required to complete the installation, follow the
instructions displayed on the screen.